GLASS BEDDING KIT 500GR

£139.99

3 in stock

SKU: GLASSBEDKIT Category:

Description

Glass Bedding Kit 500gr description:

Glass Bedding Kit 500gr Pack contains

  • Resin (500gr)
  • Hardener (500gr)
  • Release agent (120gr)
  • Brown dye (15gr)
  • Black dye (15gr)

Must be stored in a cool, dry, ventilated and frost-free environment, away from heat sources.

The GRS glass bedding kit is made for use with laminate stocks such as Hunter, Sporter, Hybrid, X Eater, and Blanks.
The kit is available in a consumer size with 2 x 75-gram components, and a 2 x 500-gram component version for gunsmiths.

GRS recommends glass bedding of laminate stocks to get maximum accuracy out of your rifle and stock combination. If you are shooting magnum calibres such as 300 Winchester Magnum, you need to glass bed your rifle, if you do not the warranty will be void.

Why glass bed? 

With few exceptions GRS laminate stocks are drop-in inlets, so why is glass bedding recommended? The answer is simple. Contact surfaces. The better the contact surfaces you have, the better grip the stock has to transfer recoil evenly into the stock. There is no hiding a laminate stock’s inlet has minor unevenness from the inleting tool and the action settles on the ridges or highest point in the inlet. When a gunsmith glass beds the stock, he removes the top layer of laminate, then uses the epoxy glass bedding between the laminate and the action, the epoxy then gives a perfect fit between action and stock. When applied correctly the glass bedding layer should have no bubbles of air in it andv will transfer of recoil evenly and consistently. This is a crucial part of obtaining optimum accuracy from your rifle.

 

Additional information

Weight 1550 g
Category

Accessories

gtin

7072171046944

Reviews

There are no reviews yet.

Be the first to review “GLASS BEDDING KIT 500GR”

Your email address will not be published. Required fields are marked *